A Forged 45 Degree Elbow is a type of pipe fitting used to change the direction of fluid flow in a piping system by 45 degrees.It is typically made from materials such as copper, aluminum, brass, or stainless steel, and is available in both threaded and socket weld configurations.A Forged 90 Degree Elbow is a type of pipe fitting used to change the direction of flow in a piping system by 90 degrees.A Threaded Street Elbow is a type of pipe fitting used in plumbing and piping systems to change the direction of the flow. It is called a street elbow because one end has a male or female threaded connection, while the other end has a plain or unthreaded connection.

A Forged Tee is a type of pipe fitting that is commonly used to branch off a pipeline or to connect pipes of different diameters. It is called a “forged” tee because it is made by heating and shaping a piece of metal, usually steel or stainless steel, into the desired tee shape. The dimensions of a forged tee depend on the size and type of pipe it is meant to connect. Typically, forged tees are available in a range of sizes from 1/8″ to 4″ and in various thicknesses to meet different pressure requirements.

Cross are the fittings are the ones that make a 90° branch from the main run of the pipe. A pipe having four openings in the same place at right angles to each other is called a ANSI B16.11 Forged Socket Weld Cross. The cross cannot directly control the flow due to its shape.Threaded Cross fittings make a 90° branch from the main run of the pipe. It can be used for providing leak free and torque free sealing in any piping or tubing connection. It is a fitting that is rarely used in a piping system but is an essential part of it nonetheless.

A forged coupling is a type of pipe fitting that is used to connect two pipes of the same or different sizes. It is called a “forged” coupling because it is made by shaping metal through a process called forging, which involves heating the metal and then hammering or pressing it into shape. Coupling dimensions refer to the specifications of a coupling, including its size, shape, and other physical characteristics. These dimensions are important because they determine whether a coupling will fit properly with the pipes it is intended to connect.

A forged steel union is a type of pipe fitting used to connect two pipes or sections of piping together. It is made by forging steel to create a strong, durable, and leak-proof joint. Orifice union fittings are a specific type of forged steel union that are designed to allow precise measurement and control of fluid flow. feature a small hole or “orifice” in the center of the fitting that restricts the flow of fluid, allowing for accurate measurements to be taken.

A Forged End Cap is a type of pipe fitting that is used to cover or close the end of a pipe. It is made by forging, which involves heating and shaping metal using a hammer or press. The B16.11 End Cap dimensions are standardized by the American Society of Mechanical Engineers (ASME) and specify the size and dimensions of the end cap. These dimensions include the nominal pipe size, the outside diameter of the pipe, the wall thickness of the pipe, and the length of the end cap.

Swage Nipple and Hex Nipple are types of pipe fittings used to connect two sections of pipe or to connect a pipe to a valve or other component. The Swage Nipple and Hex Nipple fittings can be made of various materials such as stainless steel, carbon steel, and brass. They are available in different sizes and shapes to suit specific piping needs.